WANTED COUPE
Moderator: Moderators
-
- Ultimate Post Whore
- Posts: 16726
- Joined: Tue May 18, 2004 6:00 am
- Location: Birmingham,Pyongyang, tehran or at work or on Holiday....OR AT WORK WORK
- Contact:
WANTED COUPE
HI ,
Any wrecks going cheap looking for one to cut up, I'm after all panels, rear quarters, floor, arches, sills etc..
H
Any wrecks going cheap looking for one to cut up, I'm after all panels, rear quarters, floor, arches, sills etc..
H
B S L F
2007 RINGER/Cadwell/Donnington/silverstone/
15k Poster....
One Coupe.
One focus
Bit part Frankestein Rover sport racer... sold.
-
- Club Chairman
- Posts: 5824
- Joined: Thu May 17, 2012 8:36 am
- Location: Cambridgeshire
- Contact:
Re: WANTED COUPE
I have already sacrificed one and the is a second one in my green house that is intended to be Secondly dismantled by drilling out all the pop rivets when help is available to compliment the first. These are both rust free car with damage that meant they cannot be easily put back on the Road.
I am not sure chopping up another rusty car to copy the panels that have rusted away will really help and is necessary. If a car is already in the scape yard then save anything that can be off use but buying a car that has all the panels that need to be copied and are worth cutting out is probable cutting up a car the could go back on the road.
I am not sure chopping up another rusty car to copy the panels that have rusted away will really help and is necessary. If a car is already in the scape yard then save anything that can be off use but buying a car that has all the panels that need to be copied and are worth cutting out is probable cutting up a car the could go back on the road.
- Davva
- Former RCOC Staff
- Posts: 3430
- Joined: Fri Dec 02, 2011 8:17 pm
- Location: West Londonshire
- Contact:
Re: WANTED COUPE
Not wishing to upset anyone by raising the 'Breaking good cars' arguement, but you have the monopoly of Coupes at the moment Kev that *may* never see the road again, so why not break a car and let H have the parts, then when the parts are available, get the broken car repaired using nice new panels. For most of us, we only have one Coupe, maybe 2, so don't have the luxury of a fleet to choose from or the space to keep a shell on stands for the time required for the project to deliver.
This will benefit you as well, as with new panels you'll gain a solid shell, that with a fix it day (or 2) should get the mechanicals sorted and then just needs paint, leaving you a fairly rust free example to either drive or sell on.
Seems a win - win to me, H gets his panels, an unwanted Coupe on Ebay gets saved from being broken and you get a Coupe back on the road.
This will benefit you as well, as with new panels you'll gain a solid shell, that with a fix it day (or 2) should get the mechanicals sorted and then just needs paint, leaving you a fairly rust free example to either drive or sell on.
Seems a win - win to me, H gets his panels, an unwanted Coupe on Ebay gets saved from being broken and you get a Coupe back on the road.
Dave
1993 220 NASP
1972 MG Midget
1960 Triumph Tiger Cub T20 SL
1993 220 NASP
1972 MG Midget
1960 Triumph Tiger Cub T20 SL
-
- Club Chairman
- Posts: 5824
- Joined: Thu May 17, 2012 8:36 am
- Location: Cambridgeshire
- Contact:
Re: WANTED COUPE
Well as long as it was drilling out spot welds rather than a 9 inch angle grinder being used I would probable be happy with that.
-
- Ultimate Post Whore
- Posts: 16726
- Joined: Tue May 18, 2004 6:00 am
- Location: Birmingham,Pyongyang, tehran or at work or on Holiday....OR AT WORK WORK
- Contact:
Re: WANTED COUPE
FYI Davva,
I have a brand new rear 1/4 now O/S/R, I also have two of your repair panels,I only now need and or N/S/R 1/4 these will go to my fabricator who will comepare the quality of new V copy and the price up every part/section /Panel we will need, I will probably buy in sets of ten for starters, the panels will not be damaged or even marked.. in a nut shell....
H
I have a brand new rear 1/4 now O/S/R, I also have two of your repair panels,I only now need and or N/S/R 1/4 these will go to my fabricator who will comepare the quality of new V copy and the price up every part/section /Panel we will need, I will probably buy in sets of ten for starters, the panels will not be damaged or even marked.. in a nut shell....
H
B S L F
2007 RINGER/Cadwell/Donnington/silverstone/
15k Poster....
One Coupe.
One focus
Bit part Frankestein Rover sport racer... sold.
-
- Full Member
- Posts: 384
- Joined: Sat Nov 11, 2017 4:47 pm
- Contact:
-
- Ultimate Post Whore
- Posts: 16726
- Joined: Tue May 18, 2004 6:00 am
- Location: Birmingham,Pyongyang, tehran or at work or on Holiday....OR AT WORK WORK
- Contact:
Re: WANTED COUPE
Could not possible cut holes in that one..
H
H
B S L F
2007 RINGER/Cadwell/Donnington/silverstone/
15k Poster....
One Coupe.
One focus
Bit part Frankestein Rover sport racer... sold.
-
- Full Member
- Posts: 384
- Joined: Sat Nov 11, 2017 4:47 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 3 guests